Product features
The LENFLEX Skiving Machine offers a skiving range of 4-70mm, making it ideal for a variety of wire stripping tasks. With its 380V power supply and 3KW electromotor, this crimping machine delivers reliable performance and efficiency. Its spindle rotates for skiving inner rubber while remaining stationary for skiving outer rubber, ensuring precise and clean results every time.
Team strength
At LENFLEX, our team's strength lies in our collective expertise and commitment to delivering high-quality skiving and crimping machines. With a skiving range of 4-70mm, our 380V, 3KW machine is designed to meet the needs of industrial operations with precision and efficiency. Our dedicated team of professionals works tirelessly to ensure that each machine is crafted with the utmost care and attention to detail, resulting in reliable performance and durability. By choosing LENFLEX, you can trust in the strength of our team to provide you with a top-of-the-line skiving and crimping solution that meets and exceeds your expectations.
Why choose us
At LENFLEX, our team's strength lies in our dedication to providing high-quality skiving machines that meet the needs of our customers. With a skiving range of 4-70mm, our machines are versatile and efficient, allowing for precise and accurate skiving every time. Our team's expertise in machinery and engineering ensures that each machine is built to the highest standards, guaranteeing reliability and durability. We take pride in our strong team collaboration, innovative problem-solving skills, and commitment to customer satisfaction. Trust LENFLEX for all your skiving and crimping machine needs, and experience the strength of our team firsthand.
L-LSK-B51 Technical Parameters:
Skiving range:4~70mm
Supporting mandrel:inner 04, 05, 06, 08, 10, 12, 16, 20, 24, 32; outer 12, 16, 20, 24, 32
Standard Voltage:380V 220V
Electromotor Power:3KW
Spindle speeds: 288r/min
Weight:105kg
Dimension:760×570×1230mm
Characteristic:Spindle rotate in skiving inner rubber,
Spindle non-rotation in skiving outer rubber
APPlication:2 wires, 4 wires, 6 wires
Operating procedures of skiving machine:
1、 Before starting the machine, the protective cover must be covered to check whether there are people and obstacles before and after the stripping machine.
2、 The power must be cut off when opening the hood for inspection.
3、 Before starting the machine, it is necessary to check whether the rotary knife and die core meet the specification requirements of the stripping hose.
4、 Before starting the machine, carefully measure the distance between the rotary knife and the mold core, determine the stripping work degree according to the measured jacket length, and calculate the data between the rotary knife and the steel wire layer of the rubber tube. First, use the lower corner material of the same specification for trial stripping, and adjust the knife gradually from the large radial diameter until the stripping is clean.
5、 When the stripping machine is running, if any abnormal phenomenon is found, stop the machine immediately and report the situation.
6、 When the stripping machine is running, the hose held by the operator should be kept in balance, and should not swing up and down, so as not to scratch the hose wire by the rotary knife.
7、 The rotary knife must be fixed firmly, and the knife should not be taken too hard. When the stripping work is in progress, it is forbidden to remove the cutting rubber strip by hand, so as to avoid danger.
8、 Without special training, individuals engaged in the work are not allowed to operate the machine.
9、 After stripping, turn off the main power, clean up the working site, and keep the equipment and ground clean.